- Make sure this fits by entering your model number.
- DESCRIPTION: Art printing blackout roller shade, triple weaved fabric soft and drapable, block 90% light and 100% UV ray, energy saving insulates againest heat and cold, noise is reduced and provide privacy. Shade face is art printing shade back is light grey solid color.
- MADE-TO-ORDER:We accept custom size and customer image. We sell standard size roller shade, also we can custom width and length to suit your windows. Maximum width is 96inch, if your window is larger you can choose two shorter shades instead. Having two shades give you an advantage to roll them up separately. Chains can be installed on each side of the window. AND WE ACCEPT CUSTOMER IMAGE, we can print your image on the shade, image need to be minimum 3000x3000pixel
- MOUNT TYPE AND MEASUREMENT: our shade are good for both inside mount and outside mount, inside mount require a minimum 2.5inch window frame depth, shade size need to be very accurate so please make sure check below MOUNT TYPE AND MEASUREMENT information before order
- HOW-TO-ORDER:If your shade is standard size you can order from our size list, if you can not find your size on the size list please let us know your window size and how do you want to install the shade then we will send you price and link to order
- ORDER CONFIRMATION AND SHIPPING: We will send email to all customer to double confirm the size, please check your email and let us know do you need to change the size in 24 hours. WE DO NOT DELIVER TO PO BOX ADDRESSES,Courier companies do not deliver to PO boxes and the shades are to long for Post. Please provide your delivery address. Couriers deliver 9am-5pm weekdays and ask to sign Proof of Delivery, so it could be your work address too.
MOUNT TYPES:
Inside mounted shades will have a deduction taken of approximately 1/4″ to ensure a proper fit inside the window frame.Inside mounted shades require a minimum frame depth of 2.5inch for secure installation. If your window frame depth is less than 2.5inch please select outside mount.Outside mounted shades should be ordered with the exact width of the area you wish to cover. Outside mounts are often used when there is not sufficient frame depth for inside mounting.Our shades come with all mounting hardware, and mounting hardware for both inside mount and outside mount
INSIDE MOUNT MEASUREMENT:
Step 1.Measure the inside frame width at three locations-the top,middle,and bottom. Record the smallest of the 3 measurements and use that number deduct 1/4inch as your inside width when ordering.
Step 2. Measure the height at 3 locations-the left,middle,and right side. Record the smallest of the 3 measurements and use the number as your inside width when ordering.
OUTSIDE MOUNT MEASUREMENT:
Step 1. Measure the outside frame width adding 6-10inch to be the outside mount width.
Step 2. Measure the outside frame length adding 5-10inch to be the outside mount length. The overlap it recommended to allow appropriate coverage and avoid any light gaps.
Type: Printing roller shade.
Feature: Blackout
Material: Polyester
Installation: All Mounting Hardware Included.